Homes in Sittingbourne (ME10) at a glance
This page summarises 17,730 energy performance certificates (EPCs) for homes in Sittingbourne (ME10), using the most recent certificate for each home. 41% are rated D or lower.
The median floor area is about 78 m².
Half of these certificates were issued in 2019 or later, so most describe homes as they are now or were within the last few years.
What kinds of homes are here
Terraced homes make up 46% of certificates. Mid-terraces lose less heat through shared walls, but outdoor space can be tight, so where an outdoor unit can go and how it affects neighbours is often the deciding factor.
Who owns the homes here
Tenure is mixed: of the certificates that record it, 63% are owner-occupied, 20% privately rented and 17% socially rented. Who can approve an upgrade differs between those groups, so it is worth knowing which applies before asking for quotes.
Privately rented homes in England and Wales must currently reach at least an E rating to be let, with some exemptions, and are upgraded by their landlords, so landlords are the people to talk to about those homes.
Walls and insulation
Walls are less of a concern here: only 11% are solid and 15% are unfilled cavities, with most homes recorded as filled cavity, timber frame or system built. Lofts, floors and windows are more likely to be where remaining heat is lost.
How homes are heated
92% of homes use mains gas, so for most households a heat pump would be replacing a gas boiler. Whether that saves money depends heavily on the electricity and gas price gap, the home's insulation and how efficiently the system runs, so compare itemised quotes rather than headline claims.
Among the homes that are not on gas, electric heating is the most common, at 7% of all homes here. Homes on direct electric or storage heating usually see the biggest change in running costs from a heat pump, because the comparison is with full-price electricity.
When homes were built
30% of homes date from 2003 or later. Newer homes are built to higher insulation standards and often have lower heat loss, which generally makes them easier candidates for a heat pump, though some have small cylinders or no space allocated for one.
Lofts and windows
18% of homes with a roof of their own have no loft or roof insulation recorded, or less than 100 mm. For those homes a top-up to about 270 mm is the usual EPC recommendation.
Almost all homes here are double or triple glazed: 5% have any single glazing recorded.
Energy ratings
Most homes sit in bands C and D, with 9% rated E to G. For those homes the EPC recommendations are a useful check on which upgrades are still outstanding.
Improvements suggested for homes in Sittingbourne (ME10)
Across the 17,730 certificates here, the improvements suggested most often are solar panels for electricity (74%), solar water heating (68%) and floor insulation (44%).
A heat pump is suggested on fewer than 1% of certificates here, which says more about the assessment software than about the homes.
Ask an installer about solar panels insulation
Heat pump grants across Swale
Boiler Upgrade Scheme figures are published for local authorities, not postcode districts. Across Swale, 179 heat pump installations have had a grant paid (May 2022 to September 2026).
Installers in and around Sittingbourne (ME10)
Companies House-registered installers listed for Sittingbourne: 24 installers have their registered office within 10 miles and 119 more only name the county on their website. 58 of the 143 mention heat pumps.
The typical firm has been trading for 9 years (the median, from Companies House incorporation dates).
The first listed are L R Baker Electrical Ltd, Guscott Heating Services Ltd and Kent Mechanical Ltd.
L R Baker Electrical Ltd
Says it fits air source heat pump, solar PV, battery storage, EV charging
Says it holds MCS, NICEIC, CHAS
Says it fits air source heat pump, solar PV, battery storage, boilers
Says it holds MCS, Gas Safe, Which? Trusted Trader, Checkatrade
Kent Mechanical Ltd
Says it fits air source heat pump, solar PV, battery storage, EV charging, underfloor heating, boilers
Says it holds MCS
WT Renewables Ltd
Says it fits air source heat pump
Protec Engineering Services Ltd
Says it fits solar PV, battery storage, biomass
Says it holds MCS, NAPIT
Prowired Electrical Ltd
Says it fits solar PV, battery storage, EV charging
Says it holds MCS, NICEIC
Kelly Electrical Services Ltd
Says it fits solar PV, battery storage, EV charging
Says it holds MCS, RECC, NICEIC
JLF Total Solutions Ltd
Says it fits solar PV, battery storage, EV charging
Says it holds MCS, TrustMark, RECC, NAPIT
ETJ Electrical Limited
Says it fits solar PV, battery storage
Says it holds MCS, TrustMark, RECC, NAPIT
Wingham Electrical, Design & Fire Ltd
Stonegrove Ltd.
Says it fits boilers
Says it holds Gas Safe, OFTEC, CHAS, Constructionline
J K Electrics Ltd
Primech Building Services Limited
Says it fits boilers
Invicta Clean Energy Limited
CGS (Kent) Limited
C.s.s. Environmental Limited
BJC Electrical Ltd
Jascom Electrical Contractors Limited
Says it holds NICEIC
Power Point Electric Services Limited
Solaris Installations Limited
Itech Electrical Contractors Limited
Hyperion Energy Limited
Phase Energy SE Ltd
Swift Solar Solutions Ltd
These are the first 24 of 143: firms that name this area first, then those with a registered office nearby, then those that cover the wider area; heat pump firms and the nearest first within each.
Listed from each firm's own website and from Companies House records (contains public sector information licensed under the Open Government Licence v3.0). Being listed is not a recommendation, and what firms say about themselves has not been checked: ask for an installer's MCS certificate number and consumer code membership before you sign anything.
How Sittingbourne (ME10) compares with Swale
For each of homes built before 1930, homes with solid walls, flats, detached or semi-detached homes, homes not on mains gas, homes rated E, F or G, homes with some single glazing, homes with little or no loft insulation, socially rented homes, homes with unfilled cavity walls, privately rented homes, owner-occupied homes, the share here is within 10 percentage points of the Swale figure. The largest gap is in homes built before 1930 (11% here, 19% across Swale), so the wider area's picture is a fair guide for Sittingbourne.
Sittingbourne (ME10) and its neighbours
Swale (ME9) is about 1 mile away. Detached or semi-detached homes are more common there: 72% of certificates, against 51% in Sittingbourne.
Queenborough and Halfway (ME11) is about 5 miles away. Homes with solid walls are more common there: 32% of certificates, against 11% in Sittingbourne.
Gillingham (ME8) is about 6 miles away, over the border in Medway. Homes with unfilled cavity walls are more common there: 32% of certificates, against 15% in Sittingbourne.
How Sittingbourne (ME10) ranks within Swale
Of the 5 Swale postcode districts with a page on this site, Sittingbourne (ME10) has the lowest share of homes with solid walls (11%), the lowest share of homes not on mains gas (8%) and the lowest share of homes rated E, F or G (9%).
Grants and support (England)
The Boiler Upgrade Scheme rules (who qualifies, what it covers and how the installer applies) are summarised on the Swale page, with a link to the official GOV.UK guidance.